Skip to main content

2018//4(b)//Engineering Eco//KU

Anew forklift truck will require an investment of $30,000 and is expected to have year end
MVs and annual expenses as shown in the table below. If the before-tax MARR is
10% per year, how long should the asset be retained in service?




Labels:

Comments

Post a Comment

Popular posts from this blog

2017//2(b)//Engineering Eco//KU

A loan of $10,000 is to be repaid over a period of eight years. During the first four years, exactly half of the loan principal is to be repaid (along with accumulated compound interest) by a uniform series of payments of A1 dollar per year. The other half of the loan principal is to be repaid over four years, with accumulated interest, by a uniform series of payments of A2 dollar per year, If i=9% per year, what are A1 and A2?
Post a Comment
Read more

Testing servo motor with arduino

  Testing servo motor with arduino  Components Needed: Arduino board (e.g., Arduino Uno) Servo motor Jumper wires Steps for Connection: Servo Motor Pins: Ground (GND): Usually the brown or black wire of the servo motor. Power (VCC): Usually the red wire of the servo motor. Control Signal (PWM): Usually the yellow, orange, or white wire of the servo motor. Connecting to Arduino: Ground (GND): Connect the ground wire of the servo motor to one of the GND pins on the Arduino. Power (VCC): Connect the power wire of the servo motor to the 5V pin on the Arduino. Control Signal (PWM): Connect the control signal wire of the servo motor to digital pin 9 on the Arduino, as specified in the code by myservo.attach(9); Connection Arduino  Servo motor  VCC/ 5V Red wire  GND Black Wire  9  Yellow wire Explanation: Ground (GND): This connection ensures that the servo motor and the Arduino share a common ground, which is necessary for proper operation. Power (VCC): The ...
Post a Comment
Read more

Add two 16-bits number with ADD and ADC instruction

Add two 16-bits number with ADD and ADC instruction LHLD 2501H   :  "Get 1st 16-bit number in H-L pair"    XCHG         :  "Save 1st 16-bit number in DE"    LHLD 2503H   :  "Get 2nd 16-bit number in H-L pair"    MOV A, E     :  "Get lower byte of the 1st number"    ADD L        :  "Add lower byte of the 2nd number"    MOV L, A     :  "Store result in L-register"    MOV A, D     :  "Get higher byte of the 1st number"    ADC H    ...
Post a Comment
Read more